■ ■ 鍍膜服務

裝飾膜:Decorative coating

可在鋼、銅、钛、鎢鋼等材質的工件上電鍍各種顔色的膜層
Various color series on steel,brass,titanium,or tungsten steel substrate.

1、金色膜系 Gold color series

◆真空離子鍍金,可鍍制1N14、2N18色,厚度可達到1.3MIC以上。
◆IP gold in 1N14,2N18,thickness 0.2~1.3 micron+.
◆真空離子鍍4N色和5N色玫瑰金。
◆IP rose gold in 4N and 5N.
◆通過耐磨、耐腐蝕等測試且符合RoHS标準
◆Comply with the requirements of abrasion tests, corrosion tests and RoHS standards.

2、黑色膜系 Black color series

◆槍色、钛灰色、純黑色等。
◆Gunmetal,grey,black and so on.
◆通過耐磨、人工汗等測試。
◆Comply with the requirements of abrasion tests and artificial sweat tests.
◆類金剛石膜,厚度可達1.3MIC以上。
◆DLC coating,thickness 0.7~1.3 micron+.
◆複合不同的膜層,其硬度可增加幾倍。
◆With multi-layer coating the hardness of work-piece can increase over three times.

3、特殊色系 Special color series

◆IP紫色、IP藍色、IP棕色、IP紅色、香槟色。
◆IP purple,IP blue,IP brown,IP red,IP champagne.

4、真空離子鍍不鏽鋼系列 IP Stainless-steel series

◆适合銅合金和鋅鋁合金材質的鍍膜加工。
◆IPS coating is applicable on work-pieces of brass alloy,and zinc-aluminum alloy material.
◆IPS+IPPt(離子鋼加白金)、IPS+IPPd(離子鋼加钯)具有特白首飾性效果。
◆IPS+IP Pt and IPS+IP Pd coatings enable work-pieces with whiter and glossier jewelry look.
◆IPSC即碳化不鏽鋼,色澤近不鏽鋼色,其硬度比IPS硬好幾倍。
◆IPSC (IP Stainless-steel carbonized) coating looks like stainless-steel,but it is several times harder than IPS.

5、納米透明膜系 Nano transparent coating

◆膜層厚度為10~200納米,技術成熟,可防指紋。
◆Coating thickness ranges from 10 to 200 nanometer. It is fingerprint resistant.








高新技術産品:New high-tech coating

1、複合膜層

複合膜層:複合膜層是指在同一工件上實現兩種或兩種以上顔色鍍膜。多種顔色搭配把工件裝飾得更加時尚靓麗,絢麗多彩。森科公司成功研發出真空油工藝,實現在同一工件上電鍍兩種或兩種以上顔色的多色膜層。這種免脫退工藝是森科公司的特色技術。

Multi-Color Coating

Plating two or more colors on a single work piece. Tritree has developed a vacuum oil masking method, for producing these coatings, including a proprietary de-pigmenting process.

2、IP硬膜

◆顔色為鋼色,厚度可達1.5μm左右。
◆适用于在鋼、钛、鎢鋼、合金、陶瓷、銅和銀等材質上電鍍。
◆維氏硬度較高,屬于功能膜。
◆鍍層緻密性好、均勻,耐磨損、産品表面不易刮花。
◆應用于模具、刀具、鐘表和手機片等五金件真空鍍膜。
◆符合RoHS,REACH等環保标準要求。

IPH Coating

◆Steel color, thickness around 1.5μm.
◆Suitable for steel, titanium, tungsten steel, alloy, ceramics, copper and silver material.
◆High hardness, functional coating.
◆Compact, even application, good abrasion-resistance and scratch resistance.
◆Applications include moulds, cutting bits, watches and cellphone cases.
◆Comply with RoHS and REACH environmental standards.

3、類金剛石膜

◆顔色為灰色和黑色,厚度達1.3μm以上。
◆适用于鋼、钛、鎢鋼等金屬材料的鍍膜。
◆膜層硬度高,可增長工件使用壽命。
◆鍍層均勻、耐腐蝕、耐磨損、緻密性和附着力好。
◆磨擦系數低,可提高工件表面光潔度。
◆應用于模具、刀具、鐘表和手機片等五金件真空鍍膜。
◆符合RoHS,REACH等環保标準要求。

DLC Coating (Diamond Like Carbon)

◆Grey and black color,thickness above 1.3μm.
◆Suitable for steel, titanium and tungsten steel material.
◆High hardness, prolongs the service life of the work-piece.
◆Evenness, good corrosion-resistance,abrasion-resistance, good compactness and adhesion.
◆Low friction coefficient, enhances the degree of finish.
◆Applications for various hardware accessories: moulds, cutting bits, watches and Cell phone cases .
◆Comply with RoHS and REACH environmental standards.